Hi eswar , this is sandeep from hyd, i am very much interested for learning system center products, please suggest me witch institute is best for system center products …..please share me your contact details
Hi sandeep,
am not 100% sure about training institues in system center products in India but heard that,lot of training institues are avilable in Hyederbad on Windows .Are you currently working with any of these system center products ? Or New to this world.
I will be avilable on eskonr@gmail.com.
Thanks for the info. Can you please provide any docs on application packaging. I am currently working as SMS client end support and not on SCCM console. I am trying to gain knowledge and apply for SCCM administrator. can you provide some tips and if possible let me know if there are any openings as fresher or lever 1/2.
i do not have any docs on application packaging but i would suggest you to look at appdeploy.com for all application packaging stuff..
to get good information on sccm,i would suggest to first read and understand technet document and lot of videos area avilable on net and even my blog if you are interested to learn system center. Refer windows-noob.com for step by step document and start implemeting in lab….
also participate in forums and communities to know the more and get the work arounds..
I’ve few questions on SCCM 2007 where I have got stuck . For a client which is discovered,when I go to resource explorer of that client >> Netwrok adaptor properties, I don’t get and ip address listed against this client. This is reproducible in many clients but not in all. In most of the clients it shows a valid IP. I cannot indivually go to each client with this issues as there are 100’s of them. Can you please advise?
After Migrating / Installing thousands of Windows 7 Systems, suddenly starts to Get errors on Updates Hanging on Task Sequence during installation of OSD. Not abel to find which updates it is looking for.. WSUS is working fine without any errors. After killing process, reboot computer and seen that it not installed many applications. Took out from the Domain and mannually install Windows updates from Internet (not from WSUS). System starts to work fine.
Request you to give some focus what steps need to do..
Hi Eswar,
Good evening.
I have a training to attend on SCCM 2012 but I am a beginner for SCCM.
I don’t know what, how of SCCM
Could you please suggest/Provide me any good website/Study material to refer before attending the training session
Thanks & Regards,
Gulshan Bhatia ( Gulshan.Bhatia@yahoo.com)
9910744660
i would suggest to go with TechNet website to understanding the basic and follow windows-noob.com for step by step guides.
just do search on the web about sccm.you will find lot of things and videos about it
It is basically deployment tool .
Am new to this blog and first of all thank you for creating a forum like this and helping many people like us on SCCM. Now coming to my introduction i just started working on sccm 2007 in my organization. Since i just started am assigned with lots of reporting task which takes almost day to complete same. i come accross your blog and found very interesting queries on patch compliance. My requirements is
* Total number of clients and total number of resources in a collection. (currently am having 62 collections and i click on every collection and show count option to take the count which is time consuming. so please help me with some queries to generate no of clients and resources in all collections)
* Patch compliance report for specific deployment and for all collections ( again am extracting each report for every collection and taking percentage of compliant through enforcement status for deployment. what i am looking for is every month we creating a update list like nov 13 and deploying it on each collection. so everytime i need to select that nov 13 collection name and extract the report for each.)
I tried my best to explai what exactly am looking for. Hope u will understand and help me with queries or better way to manage efficiently and quickly..
Hi eswar.. thanks a ton.. first query worked for me.. but second query is for 2012 version but am working in 2007 and i dont know to use xml.. please recheck and help me soon.
It is possible that two primary site servers which are in different domains ( No Trust Relation Between domains) can communicate CAS ? and communication between primary site servers?
AFAIK, without any trust relationship,they will not be able to communicate each other .btw,where is your CAS located ? CAS part of one of the domain ? or different domain ?
Eswar Koneti's blog 
Sandeep Thotakura said
Hi eswar , this is sandeep from hyd, i am very much interested for learning system center products, please suggest me witch institute is best for system center products …..please share me your contact details
admin said
Hi sandeep,
am not 100% sure about training institues in system center products in India but heard that,lot of training institues are avilable in Hyederbad on Windows .Are you currently working with any of these system center products ? Or New to this world.
I will be avilable on eskonr@gmail.com.
Sandeep Thotakura said
Hi eswar , meny thanks for u r responce ….presently i am working on SCCM ( only patching ), I want to know about OSD ,App deployment, and SCOM etc
admin said
Hi,
You have lot of Guides with screen shots avilable here on Windows-noob http://www.windows-noob.com/forums/index.php?/topic/1064-sccm-2007-guides/ . Start digging into it.You will some interesting and fun as well.
Sandeep Thotakura said
Hi eswar ,
how are you , belated happy new year
can please share me your contact number . i need some help about SCCM and SCOM
Sravanth said
Hi Eswar,
Thanks for the info. Can you please provide any docs on application packaging. I am currently working as SMS client end support and not on SCCM console. I am trying to gain knowledge and apply for SCCM administrator. can you provide some tips and if possible let me know if there are any openings as fresher or lever 1/2.
Eswar Koneti said
i do not have any docs on application packaging but i would suggest you to look at appdeploy.com for all application packaging stuff..
to get good information on sccm,i would suggest to first read and understand technet document and lot of videos area avilable on net and even my blog if you are interested to learn system center. Refer windows-noob.com for step by step document and start implemeting in lab….
also participate in forums and communities to know the more and get the work arounds..
vishal said
hi can you provide any ebook for sccm 2012 and some interview ques too.
Eswar Koneti said
Hi vishal,
I go with http://eskonr.com/2012/05/technical-documentation-for-sccm-2012-in-pdfword-and-msi-files/ always if i need something and i prefer MS.
Questions are too tuff to say and it all depends on the tech guy who pose it.If i were you,i will be confident on what i do on daily work that helps you lot.
sccm_d3 said
Hello Eswar,
I’ve few questions on SCCM 2007 where I have got stuck . For a client which is discovered,when I go to resource explorer of that client >> Netwrok adaptor properties, I don’t get and ip address listed against this client. This is reproducible in many clients but not in all. In most of the clients it shows a valid IP. I cannot indivually go to each client with this issues as there are 100’s of them. Can you please advise?
Regards,
Naveen
Eswar Koneti said
This information will come from DDR.You may create collection for the list of computers who has blank IP address and try DDR on them.
Hiren Jani said
After Migrating / Installing thousands of Windows 7 Systems, suddenly starts to Get errors on Updates Hanging on Task Sequence during installation of OSD. Not abel to find which updates it is looking for.. WSUS is working fine without any errors. After killing process, reboot computer and seen that it not installed many applications. Took out from the Domain and mannually install Windows updates from Internet (not from WSUS). System starts to work fine.
Request you to give some focus what steps need to do..
Nagaraju said
Hi,
You have any step by step document for Out of band management.
Eswar Koneti said
nope,i do not have on OOB
Gulshan said
Hi Eswar,
Good evening.
I have a training to attend on SCCM 2012 but I am a beginner for SCCM.
I don’t know what, how of SCCM
Could you please suggest/Provide me any good website/Study material to refer before attending the training session
Thanks & Regards,
Gulshan Bhatia ( Gulshan.Bhatia@yahoo.com)
9910744660
Eswar Koneti said
i would suggest to go with TechNet website to understanding the basic and follow windows-noob.com for step by step guides.
just do search on the web about sccm.you will find lot of things and videos about it
It is basically deployment tool .
ravi.vrg said
HI eswar,
Am new to this blog and first of all thank you for creating a forum like this and helping many people like us on SCCM. Now coming to my introduction i just started working on sccm 2007 in my organization. Since i just started am assigned with lots of reporting task which takes almost day to complete same. i come accross your blog and found very interesting queries on patch compliance. My requirements is
* Total number of clients and total number of resources in a collection. (currently am having 62 collections and i click on every collection and show count option to take the count which is time consuming. so please help me with some queries to generate no of clients and resources in all collections)
* Patch compliance report for specific deployment and for all collections ( again am extracting each report for every collection and taking percentage of compliant through enforcement status for deployment. what i am looking for is every month we creating a update list like nov 13 and deploying it on each collection. so everytime i need to select that nov 13 collection name and extract the report for each.)
I tried my best to explai what exactly am looking for. Hope u will understand and help me with queries or better way to manage efficiently and quickly..
Thanks in advance
Eswar Koneti said
check on the blog,you will get what is required. http://eskonr.com/2013/10/sccm-configmgr-ssrs-reportlist-all-collections-with-count-of-client-installedassignedactive-and-obsolete/ and http://ninet.org/2012/04/sccm-patch-compliance-reports/
do register to get posts via email that helps you to update what is new on the blog.
ravi.vrg said
Hi eswar.. thanks a ton.. first query worked for me.. but second query is for 2012 version but am working in 2007 and i dont know to use xml.. please recheck and help me soon.
Eswar Koneti said
ok may be you should try this http://eskonr.com/?s=patch+compliance .i do not have readymade quires on this.
saritha said
Hi Eswar,
It is possible that two primary site servers which are in different domains ( No Trust Relation Between domains) can communicate CAS ? and communication between primary site servers?
Eswar Koneti said
AFAIK, without any trust relationship,they will not be able to communicate each other .btw,where is your CAS located ? CAS part of one of the domain ? or different domain ?
saritha said
Hi,
Thankyou for the response, CAS is in different domain.
Eswar Koneti said
are they in same forest ? if both the domains are in same forest but different domain,yes they do support.Please refer more information from technet blogs http://blogs.technet.com/b/neilp/archive/2012/09/04/cross-forest-support-in-configmgr-2012-part-4-deploying-sites-in-multiple-forests.aspx